Glenn Kyllonen, CEO and Founder of Headwind Technologies Ltd. wishes to welcome Anthony Bing as our new President and Chief Operating Officer. Anthony brings a wealth of knowledge and experience to bear from his extensive history in manufacturing and management as a former General Manager and Director of Operations for Surespan & then Surerus, a billion-dollar company. Anthony oversaw operations and installations ranging from $30 million to $300 million and worked within management of projects of over $1 Billion recently. As an entrepreneur Anthony built his equipment business into a $46 million venture and intends to do the same for Headwind. Anthony holds degrees in Business Entrepreneurship, Accounting and Economics and has completed 1/3 of his Master’s in Business Management through Harvard University. Working closely with Glenn, Anthony will make Headwind the first choice in wind power generated technologies starting with our Windshark 20 and Windshark 30. By spearheading the launch of our low wind turbines to the forefront Headwind will make our green technologies accessible for public and business consumers alike.
On a second very exciting note, Headwind will be starting to manufacture the turbines with our Canadian Molding Manufacturer immediately. The lead time in our current world of manufacturing is about 12 weeks from order. As a smart investor, get ahead of the line and be one of the 1st WS30 owners as we go to market. By doing so, you will be ahead of the curve and demand.
Further news, Headwind is getting ready to launch our next Windshark 30 Pilot Project (“WS30”) with complete turnkey plug and play system including the Wind PMG 1 kW Generator which starts generating power at 12kph of Wind Speed. The kit will come with options of a tripod stand for securing the Turbine or a gable stand-off mount similar to what a satellite dish uses for securing to a building or wall. The upcoming Pilot Project will focus furthering our relationship with Aurora Wind, Telus and the Canadian Railways to list a few.
All Interests in getting your name on the list as well as ordering your Wind Sharks 20 and the new Wind Shark 30 please reach out to firstname.lastname@example.org.
Our President’s Anthony contact is 250-794-7719 PST or by email, email@example.com.
Stay tuned for further details and data as we get underway with the Pilot Projects.
In 2019 we were contacted by a company then called Aurora Wind Energy. They were not getting the results from their current vertical axis wind turbines that they expected. We provide them with a Wind Shark 20 to try and they were very happy with turbine performance. The pole is monitored by an objective third party and as you can see in the output graphs below that the Wind Shark made more power more days of the month than the previous turbine they were using which is at least double the size.
Pre Wind Shark
Post Wind Shark
The Wind Shark made 3 times the power of the previous turbine in the same location as the turbine they previously had at the same location. We have since become the main supplier of turbines for Aurora.
A lot has been going on over the course of the year here at Headwind Technologies Ltd. We have been designing and testing our Wind Shark turbines for a variety of applications and exploring various methods of manufacturing while trying to come up with the best combinations of hardware to go along with them.
So we wanted to give you a bit of a recap of what's been happening, what are latest plans are, and where we are going in the future with the Wind Shark's development.
We've had great success with the 3D printed versions of our Wind Shark 20 and learned a great deal about the features and benefits of the design. (20" dimension turbine with a 200watt generator) we have been exploring the scalability of the wind shark to better suit the needs of each application.
What do the numbers on the windshark mean?
The numbers indicate the height of the turbine blades in inches. ex. Windshark 20 = 20".
WS20 -Reef Shark
The 20" tall Reef Shark was designed to best suit 12v applications such as marine, RV use, and street lights. It's 20" height fits easily through the door of most RV's.
WS30 - Mako Shark
The 30" Mako Shark is currently being tested with a 1kW generator. This version is better suited for 24v - 48v systems. These are for use on tiny homes, cottages, or in telecommunication.
WS40 - Tiger Shark
The 40" Tiger Shark will be developed for residential uses.
WS60 - Great White Shark
The 60" Great White Shark will be used for light industrial such as greenhouses.
WS120 - Megaledon
The 120" Megaledon will be designed for disaster relief where much power is required.
Like all other businesses on the planet, we were severely affected by the the Covid 19 pandemic. Our mass manufacturer became too busy producing PPE and we were unable to get components from other parts of the world.
We were able to use some of that time to continue R&D on the 30" Mako Shark.
Now that the WS30 R&D phase has ended and some borders are opening up we are back into production of the 3D printed Wind Shark 20 line.
Currently sales of the WS20s have been limited to our early investors and to supplying our partners at Aurora (now E2sE) for their commercial lighting trailers but we will be taking pre orders for the Wind Shark 20s from the general public for delivery in 2021 very soon.
(Video above shows the "Wind Shark 20" attached to a 500 Watt generator, charging a 24 Volt battery bank.)
Thank you for your support!
Glen Kyllonen CEO
Headwind Technologies Ltd
A lot has been going on here at Headwind since our last posting.
Here is a brief breakdown of the progress to date:
We sourced an offshore generator to pair with our turbine, accelerating the ability to get into the market as soon as possible.
We've tested the latest generator, and create a torque measurement device to help determine how the blade and generator functioned under various load conditions.
We have been talking to suppliers and testing new materials with diverse molding properties. In order to test these, we had to create new sets of silicone mold liners to handle the heat generated by the new material.
We took the opportunity to modify our outer mold jackets in order to speed up the molding, de-molding, and roto-mold process.
We researched a lot of large format 3D printers and finally found one that met all of our requirements. We are currently undergoing the refining process for best results. This printer will allow us to have rapid prototyping for full scale turbine blades; Once established we will be exploring materials such as: Hemp, ASA, or Carbon Fiber.
We created a 3D scanner and are planning to scan and 3D print existing components in-house to make the transition to injection molding as cost effective as possible.
We have approached developers in injection molding for future mass production once further methodology has been formed.
Thanks for all your support!
Headwind Technologies Team
We give our great thanks once again to all our community of supporters, who have joined the team and to say: "We want a change, and it starts with us."
The founders here have been working tirelessly since the success of the Vested campaign. Designs and parts for the generator were formulated, tested, refined, and calibrated relentlessly. We found that while our generator design works very well in low winds it cannot yet efficiently transition to take advantage of the higher wind speeds. We recently enlisted the services of an expert in battery technology, to review our generator and suggest ways to further optimize it.
While we do this, we have ordered a generator that we anticipate to be a good match for the turbine; if all criteria are met, this will get the turbine in your hands that much sooner!
Our blade production mold is complete and we are testing materials for the roto-molding process. Many materials that we have tried thus far still break down over time under UV radiation.
Alternatively, we have currently placed a down payment on a 3D printer capable of printing the turbines at full scale; which gives us the opportunity to print light weight blades from recyclable materials. The printer is still many weeks away however, as this is a new design and they are still updating the software.
The present objectives:
- Test the new generator when it arrives.
- Continue testing new materials, then begin replication of the blades for market.
- Assemble the 3D printer when it arrives, and printing the turbine full size in various materials such as PetG or Carbon Fibre.
Exciting times! We are that much closer to bringing the "Wind Shark" turbine to your roof tops, thanks to all of your support!
More updates to come.
Headwind Technologies Team
Here are the latest circuit boards and print tests! Now that we have the power optimization chips in place, we'll be hooking them up to the onboard charge controller to bring them to life!
Along with the heart of the turbine, we have been exploring 3D printing after digitizing the blade mold! This is a simple print test, but we aim to be producing a larger scale version with a Eco-friendly material that not only makes it better for the environment, but also good on your pocket book!
More updates to come! We couldn't do this without all of you and your partnership for a greener future.
Headwind Technologies Team
First off, we would like to thank you all for your amazing response and support in these first few weeks of the campaign launch. In 2 weeks alone, we're nearly half way to our goal, and that's all thanks to you!